21/07/2024
Here is a concise step-by-step guide on how to produce liquid wash:
**INGREDIENTS**
1)Nitrosol or Antisol (thickener)
2)Caustic soda (removes dirt)
3)Soda ash (stain remover)
4)SLS (foaming agent)
5)Sulphonic acid (cleaning agent)
6)STPP (thickener and foaming booster)
7)Texapon (foaming booster)
8)Preservative (formalin)
9)Fragrance
10)Colour
**EQUIPMENT**
1)Large mixing bucket
2)Stirring rod
3)Measuring cups and spoons
4)Bottles for packaging
**STEPS**
A)Dissolve the SLS in water and set aside.
In the mixing bucket, add the Nitrosol and stir for 3 minutes to dissolve.
B)Add the STPP and stir for 2-3 minutes until dissolved.
C)Dissolve the caustic soda in water and add to the mixture, stirring vigorously for 3 minutes.
d)In a separate container, dissolve the soda ash in water and add to the main mixture, stirring for 3-5 minutes.
E) Add the sulphonic acid and stir until the mixture turns white.
F) Add the Texapon and SLS solution, stirring to incorporate.
G) Add the preservative, fragrance and colour, mixing well.
H) Allow the mixture to rest for 6 hours before pouring into bottles.
NOTE: The key steps are dissolving the chemicals properly, adding the ingredients in the right order, and allowing the soap to fully develop before bottling. With the right ingredients and precautions, you can produce high-quality liquid wash at home.
