I Detail Brisbane

04/04/2026

Haydn’s gorgeous RS5 Sportback - oh so photogenic from any angle!
Even being well cared for, it’s unavoidable to end up with some wash marks - But it’s nothing that we can’t address!
After the mandatory decon wash process we jumped into paint correction.
Extensive use of medium and fine compounds with a few different pads and sizes getting into all the flutes and carve outs in the bumpers and body lines.
Ones we were happy with the clarity we locked it all in with CS Ultra!
Love the styling of this car! Pure Art ❤️‍🔥

04/04/2026

Josie’s brand new BMW X7 came in for a good clean up and protection package, daily duties in a semi rural setting definitely puts the pressure on keeping cars clean. Extensive decon wash, clay and chemicals to strip off to get ready for Paint Correction.
Ofcourse the tried and tested path of pads and compounds made all the difference here, the right pad and polish combination gave out stunning results, pulling out defects and marks leaving glass like gloss.
Sealed with CS Ultra.
Overcast pictures :( - the white is stunning in the sun!

22/03/2026

We had Mark’s new to him Range Rover SVR in vibrant Velocity Blue in for the treatment. Extensive paint correction all over compounds and pads just do not disappoint! They cut, refine and leave the perfect finish Everytime! When we got it it was full of buffer trails, light scratches, fingernail marks in door cups etc.. Once we were happy with the paint condition, straight to the top shelf Gtechniq CS Ultra. Locked and loaded - this supercharged SUV is now the centre of attention everywhere!

22/03/2026

We had Karen’s Brad new Kia EV5 in for Correction and Paint Protection package.

After a correction of all the defects from pre-delivery ( compounds and pads) we installed GTechniq CS Ultra

24/02/2026

24/02/2026

We had Andy’s gorgeous RA28 in for another re-coating, not that it actually needed it, it was still glossy, slick and water beading from the old coating we did. But after some life in a few workshops getting some more tweaks to the 1JZ heart, it was good to give it all a nice once over and reapply something even better after getting some paint correction love with pads and compounds - we seals it up with CSL.
Thanks

06/12/2025

Jaynes brand new Model Y in stunning Glacier Blue, all corrected and protected in GTechniq CSL, along with interior GTechniq Leather and Fabric AB on the interior.

20/11/2025

Brittany’s M3, new to her after family owned it from new (and we did the original coating 5 years ago!)
GTechniq CSL coating still performing but showing some signed of water etching and some wash marks - not bad considering it’s 5 years old! compounds and pads used to tidy all that up to that amazing candy red gloss that the Tesla deserves. Absolutely gorgeous in the sun!! Re-applied a fresh layer of GTechniq CSL as it serve it well the first time.

20/11/2025

Sarah’s Tiguan in for some tidy up and protection, VW’s and many euros are notoriously bad for brake dust contamination - as seen in the purple reactive decon wash.. once that was safely removed and cleaned we progressed to pads and mc3000 compound for the perfect balance of cutting power and refining ability to get the perfect finish!
GTechniq CSL applied to finish up.

20/11/2025

Barts S3 in for a good tidy up!
compounds and pads enhanced that stunning Audi silver and we filled a subtle chip repair and had some PDR from Prescision Hail. All completed with GTechniq CSL applied for great performance and protection.

20/11/2025

My ’new to me’ Q7 - the chalky white sunburnt paint did not deter me from picking up this fully loaded 4.2 TDI v8 luxury land yacht..
Needing a few chip repairs and a very comprehensive paint correction process, we mainly used HC4000, MC3000 compounds with Zvizzer White Wool pads and Yellow medium/soft pads.
We’re trialling a new coating - so what better than to try it on mine! We will keep you posted on that. And yes it needs a bit of PDR on some panels 😎

20/11/2025

Rhett’s BT-50 in for extensive final touch correction, there is sometimes a lot that can be improved upon with factory finishes, sometimes not requiring heavy cutting or course compounds - sometimes it’s the light touch FC2000 compound with a super soft Zvizzer Green Trapez pad which does the trick on the super soft easy to mark paint. We did a few combos around this job with all the different painted substrates. Then locking all that clarity in with CS Ultra 💪🏻