Fast Specialties

05/29/2026

Braedon brought in his 2002 Mercedes C32 AMG this morning for a baseline dyno service. He stated he had the car dyno tested before he installed a ported intake manifold and supercharger and wanted to see how much more power the car was making.

05/28/2026

We are growing! If you have a passion for hot rods, performance cars, and experience writing service, we'd love to chat with you! We are looking to add another Service Writer. Details can be found here:

Performance Shop Service Advisor – Fast Specialties Are you passionate about hot rods, race cars, performance builds, and automotive culture? Want to build a ca...

05/27/2026

Skylor initially had his 2009 GMC Sierra 2500 in the shop for a TSP Chopocabra camshaft upgrade. During tear down we found that a lifter had been stuck open and that the cam bearings were going to need to be replaced. We installed new lifters, cam bearings, and got the engine fully reassembled and installed prior to dyno tuning

05/26/2026

Our customer Scott was having some issues with the tune and reliability in his LS-swapped BMW touring car. We were happy to get it in the shop this February and diagnose a couple issues as well as squeeze some more reliable power out of it. He now has a couple of races under his belt in which the car has been totally reliable, an issue he struggled with all last season. Check out this in-car footage he posted from Pacific Raceways.
https://youtu.be/-urGluzC3D0?si=e7NltodJpmLOMA5t

05/18/2026

Nathan’s 2006 Ford Mustang GT was recently upgraded to stage 2 COMP cams and had a Boundary Racing oil pump installed for added reliability and insurance. His Mustang then came straight to us for tuning.

05/14/2026

Sean recently brought in his mother’s 2000 Honda S2000 because it was having no crank, no start issues. We diagnosed a bad starter as well as a coolant leak from the radiator. We got the starter replaced and replaced the radiator with an upgraded CFS radiator. The AP1 Honda S2000 is only becoming more rare, and we were happy to have such a clean example come through the shop.

05/12/2026

We had Tom’s lifted LS swapped 1994 Volvo 940 in the shop recently for tuning. His Volvo is powered by the same 4.8L LS that originally lived in our shop truck before we swapped our truck over to a turbo 6.0L setup. This thing rips and turns heads everywhere!

05/07/2026

Brett recently purchased a low mileage 2007 Ford Mustang GT500 with some unknown modifications. We were able to get a couple issues resolved in our pre-dyno inspection and gave it a good bill of health prior to tuning. His GT500 made 569 HP and 537 ft-lb torque to the wheels.

05/07/2026

Nolan recently installed a Chopacabra TSP cam kit in his 2010 Chevy 1500 pickup and brought it to us for tuning. During our pre-dyno inspection we found the front timing cover needed replaced to work correctly with his cam kit, once replaced the truck ran great and made good power on the dyno.

05/05/2026

We had Jared’s 1989 Honda Prelude in the shop after one of his steering knuckles broke. We replaced the front hub for him and upgrade the car to a set of drilled brake rotors. We also installed a new throttle position sensor to smooth out throttle response and the car handles great.