BAT Onsite is Proudly Protecting and Preserving Maryland’s Waterways, Ground Water, & the Chesapeake Bay since 2015. With 0ver 30 years’ experience in the Automated Onsite Industry. Maintenance, and Design Services for Automated Onsite Wastewater Systems. We are MDE BAT Certified to maintain: Advantex, NORWECO, BioMicrobics, EcoPod, Hoot, and SeptiTech Advance Treatment Units (ATU). We are also Fa
ctory Authorized Service Providers for GeoFlow and American Manufacturing drip dispersal systems. In addition to these we also provide service to other automated systems: Sand Mounds, At-Grade Mounds, Low pressure Dosing Systems. Time Dosing Systems, Pump to Gravity Systems, and many more. Automated Systems have been used in MD for many years, for a variety of reasons. One of the ATUs I service has been manufacturing a variation of their unit since the 1950s. Some ATUs were installed in the 70s to enable building on smaller building lots. And many older homes are retrofitted with these systems due to “Marginal Soils”. (The ground does not perc to today’s standards) These Systems are referred to as Innovated and Alternative systems (I &A). In recent years, the use of these systems has become more common place. The use of Sand Mounds, At-Grade Mounds, and ATUs (BAT) have made properties that previously were not buildable, be able to process and dispose of waste onsite. What most all of these Automated Systems do is process waste in a more efficient a thorough manner. They clean and disperse wastewater so that your Onsite System will last as long as it possibly can. And by cleaning the wastewater using this technology, you are protecting our drinking water, our waterways and our Chesapeake Bay. All of these Automated systems should be evaluated and/or service by a qualified service provider at least once a year. Some units require more frequent servicing. Please contact BAT Onsite, LLC for all of your Automated Onsite Wastewater needs at 301-829-9057 or at [email protected]