01/26/2026
Not all finish product is perfect, but we sure do our best to come close ✨
Here are the methods we used to get the job done:
1. Sweep & degrease first (important in kitchens)
2. Apply rust remover directly to stains
3. Let dwell 2–5 minutes (don’t let it dry)
4. Scrub with a soft nylon brush
5. Rinse thoroughly with clean water
6. Neutralize with light baking soda & water rinse
If there are some rust difficult to come off, use an oxalic-acid–based poultice such as Bar Keepers Friend Soft Cleanser:
• Make a thick paste
• Lay it on the stain
• Cover with plastic wrap
• Let sit 20–30 minutes
• Light nylon scrub, rinse, neutralize
👉 If it doesn’t fade after this, stop. Anything stronger will damage the epoxy