09/21/2025
ā ļø Safety first
ā¢ Wear rubber gloves and make sure the bathroom is well-ventilated.
ā¢ Keep away from natural stone (marble, travertine, granite) ā Zep is acidic and will etch it.
ā¢ Do not mix with bleach or ammonia.
ā¢ Always test on a small, hidden area first.
Step-by-step
1. Prep the shower
ā¢ Remove bottles, razors, and mats.
ā¢ Rinse glass quickly with warm water to loosen dust and surface dirt.
2. Apply Zep cleaner
ā¢ Hold bottle 6ā8 inches away and spray directly onto the glass, especially where the soap scum and water marks are thickest.
ā¢ Let it sit 2ā3 minutes ā this gives the formula time to break down scum and mineral deposits. Donāt let it dry on the glass.
3. Scrub gently
ā¢ Use a non-scratch sponge or damp microfiber cloth to scrub the glass in circular motions.
ā¢ For gummy residue or heavy soap film, reapply Zep and use a plastic scraper or nylon scrub pad carefully.
4. Rinse thoroughly
ā¢ Rinse glass completely with warm water until all cleaner is gone.
ā¢ Wipe down fixtures too so nothing sits on the metal.
5. Dry & polish
ā¢ Use a squeegee to pull water off the glass.
ā¢ Buff with a clean microfiber cloth to prevent new water spots.
šØšØMaintenance tip
ā¢ After showers, run a squeegee or microfiber towel over the glass ā this keeps soap scum and water marks from coming back quickly.
ā¢ Use Zep for monthly deep cleaning; between uses, a 1:1 mix of vinegar and water (only on glass/tile, not stone) works as a quick daily spray.
