Coast Pro Wash and Coating Systems

Coast Pro Wash and Coating Systems Coast Pro Wash and Coating Systems is a full service floor coatings and pressure washing company offering both residential and commercial services.

Coast Pro Wash is a full service pressure washing company offering both residential and commercial services. We have highly trained workers ready to pressure wash your building, home or parking lot. We can handle jobs of just about any size, in fact we have even pressure washed the Mississippi Coast Coliseum roof. This was a 100,000+ sq/ft project, So don’t hesitate to consider us for jobs of any

scope or size. We service the entire Mississippi Gulf Coast including the areas of Biloxi, Gulfport, Ocean Springs, Gautier, D'Iberville and Pascagoula. Our team prides itself on fast reliable service with a great attitude. Our pressure washing rig is able to complete jobs with great precision and the required power level.

The first week of June feels mild compared to what's coming. By the end of the month, surface temperatures on your drive...
06/01/2026

The first week of June feels mild compared to what's coming. By the end of the month, surface temperatures on your driveway will run 30 to 40 degrees hotter than the air around them.

That heat doesn't just sit there. It pushes moisture out of the slab, expands every existing crack, and bakes anything spilled on the surface into the concrete permanently.

If your concrete is already showing wear, June is when it accelerates.

First comment for the link 👇

We coated a commercial kitchen floor that gets hot grease, harsh cleaning chemicals, heavy equipment, and constant foot ...
05/29/2026

We coated a commercial kitchen floor that gets hot grease, harsh cleaning chemicals, heavy equipment, and constant foot traffic every single day. The kind of environment that destroys bare concrete in months.

The owner called after a year to tell us the floor still looks like it did on install day. Not because he wanted anything. He just wanted to say thanks.

If commercial abuse can't break it, your garage will be fine. First comment has the link.

Water that pools on your concrete isn't just a nuisance. It's actively soaking into the slab, creating the low spots tha...
05/28/2026

Water that pools on your concrete isn't just a nuisance. It's actively soaking into the slab, creating the low spots that hold even more water next time. The problem feeds itself.

A coated surface with proper texture allows water to sheet off instead of sitting. Combined with correct slope and drainage, it protects the concrete from the standing water that causes the most damage.

Surface management is part of the protection plan. First comment has the link.

When it rains on the Gulf Coast, your unprotected concrete absorbs water for hours. Some of that water evaporates when t...
05/28/2026

When it rains on the Gulf Coast, your unprotected concrete absorbs water for hours. Some of that water evaporates when the sun comes out. The rest stays inside the slab.

Next rain adds more. Then more. The concrete never fully dries between storms because we get too much rain too often. Each storm adds to the moisture load your slab is already carrying.

A coated surface sheds water instead of drinking it in. First comment has the link.

This driveway in Pascagoula was rough, stained, and cracking at the expansion joints. The homeowner had gotten used to i...
05/27/2026

This driveway in Pascagoula was rough, stained, and cracking at the expansion joints. The homeowner had gotten used to it. The neighbors hadn't.

After we prepped and coated it, the first person to say something was the neighbor across the street. Then the one next door. Within a week, three other homeowners on the block asked for our number.

Good work speaks for itself. If your driveway needs the same treatment, link in the first comment.

A thin coat of a premium brand will underperform a thick application of a quality product every time. Thickness is what ...
05/27/2026

A thin coat of a premium brand will underperform a thick application of a quality product every time. Thickness is what determines wear resistance, impact protection, and how long the system lasts.

Marketing sells brand names. Physics sells thickness. A properly built coating system with the right mil thickness for your use case will outlast a single thin layer of anything, regardless of what it says on the bucket.

Ask about system thickness, not just product names. First comment has the link.

Your concrete might look fine from a distance. But get close. Run your hand across it. Check the edges where water pools...
05/26/2026

Your concrete might look fine from a distance. But get close. Run your hand across it. Check the edges where water pools. Look at the spots where the color has changed.

The early signs of damage are subtle. Slightly rough texture. A spot that stays damp longer than the rest. A hairline crack you didn't notice before. These are the signals that bigger problems are forming underneath.

Don't wait for the obvious damage. First comment has the link.

Since the day it was poured, your concrete has been absorbing everything that touches it. Water, oil, chemicals, UV radi...
05/26/2026

Since the day it was poured, your concrete has been absorbing everything that touches it. Water, oil, chemicals, UV radiation, minerals from the soil below.

None of that leaves. It accumulates inside the pores of the slab, slowly breaking down the internal structure. By the time the surface shows damage, the inside has been compromised for years.

Sealing the surface now stops what's been building underneath. Check the first comment.

A polyaspartic coating doesn't just look good. It's chemically resistant to the things that destroy bare concrete.Motor ...
05/25/2026

A polyaspartic coating doesn't just look good. It's chemically resistant to the things that destroy bare concrete.

Motor oil, brake fluid, battery acid, fertilizer, pool chemicals, and household cleaners all sit on the surface instead of soaking in. You wipe them up and the floor underneath is untouched.

For garages, workshops, and areas around pools, chemical resistance isn't a bonus feature. It's the whole point. First comment has the link.

After we coated a homeowner's garage, they called back three months later. Not with a complaint. They wanted us to do th...
05/25/2026

After we coated a homeowner's garage, they called back three months later. Not with a complaint. They wanted us to do the same thing at their rental property across town.

When someone pays you twice, that's the strongest endorsement there is. They saw how the first floor held up through daily use and decided every property they own deserves the same treatment.

If you've been on the fence, first comment has the link.

Address

Ocean Springs, MS
39564

Telephone

(228) 327-3747

Website

http://coastprocoatings.com/

Alerts

Be the first to know and let us send you an email when Coast Pro Wash and Coating Systems posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Coast Pro Wash and Coating Systems:

Shortcuts

Share

Category