04/19/2026
🌊✨ SPRING POOL STARTUP GUIDE ✨🌊
Winter is over and your pool is CALLING. Here's your step-by-step checklist to open up the RIGHT way this spring — no green water, no headaches.
🔑 The 8-Step Startup:
1️⃣ Remove & clean the cover
2️⃣ Inspect all equipment for damage
3️⃣ Top off the water level
4️⃣ Start up circulation system (run 24hrs first!)
5️⃣ Test water chemistry BEFORE adding chemicals
6️⃣ Balance in order: Alkalinity → pH → Calcium → Chlorine
7️⃣ SHOCK the pool (always at night 🌙)
8️⃣ Brush, vacuum, and skim until crystal clear
💡 PRO TIP: Always wait 24 hours between chemicals and re-test. Patience = perfect water.
Drop a 💧 in the comments if you're opening your pool this week!
---
🌞 IT'S POOL SEASON — Here's How to Open Yours the RIGHT Way!
Spring is finally here, and if you have a pool, now is the time to get it ready. Whether it's crystal clear or a full-on swamp, this 8-step spring startup guide will have you swimming in no time.
✅ SPRING POOL STARTUP CHECKLIST:
1. Remove and clean your cover (pump off standing water first!)
2. Inspect your pump, filter, and heater for any winter damage
3. Top off water to the midpoint of the skimmer opening
4. Restart circulation and run for 24 hours before adding any chemicals
5. Test your water chemistry with a 6-in-1 test kit or at your local pool store
6. Balance chemicals in order: Total Alkalinity first, then pH, then Calcium Hardness, then Chlorine
7. Shock the pool at night using calcium hypochlorite (1 lb per 10,000 gallons)
8. Brush, vacuum, and skim — run the filter 24/7 the first week
📊 IDEAL WATER CHEMISTRY:
• pH: 7.4 – 7.6
• Total Alkalinity: 80–120 ppm
• Calcium Hardness: 200–400 ppm
• Free Chlorine: 1–3 ppm
• Cyanuric Acid: 30–50 ppm
💡 PRO TIP: Never skip the 24-hour rule. Add a chemical, run the pump, wait a full day, then re-test before adding anything else. This single habit will save you money and frustration all season long.
Share this with a friend who's about to open their pool! 👇
Send a message to learn more