GDY pool repairs

05/30/2026

A bad seam. a defect during manufacturing.
Sometimes I can fix these and sometimes I can’t, but always willing to try.
This one was repaired successfully.

02/04/2026

Always check the return fixture

12/25/2025

Merry Christmas 🎄

11/26/2025

We’re having a third summer apparently.
Warm enough to swim imo

11/12/2025

Video from earlier this year. Found these by chance, hadn’t even run the leak detector yet.

11/01/2025

And that wraps up our season, it’s been a successful year and I’ve been listening to customers about services I should do throughout the swimming season.
More to come next year, if you have an emergency water loss over tge off season feel free to call or text me or message me here and I’ll try to help.
👋 till next year,
-Paul

10/24/2025

This Endless Pools auto cover was rolling up very crooked. Almost 4 inches off to one side. This one’s running ropes and depending on circumstances a rope can stretch, hardware can bend, things happen 🤷🏼‍♂️
Took a bit of work and got it rolling up within 1/4 inch side to side. Looks much better. This pool also had a support that hung lower and scratched the lead bar. Fixed that as well.

10/18/2025

Troubling heater.
this unit would turn on, show no error codes, input settings and hold. But wouldn’t heat the water.
Opened to find the burned board.
Board replaced, contractor also replaced and the unit is now heating well 👌

09/12/2025

Note to installers, this is NOT how you install a liner. This installer cut the box before the faceplate was installed.
The detector often hits on returns and skimmer screws but after removing the plate I find this. I patched around this and reinstalled the faceplate but this is extremely bad work and usually requires a new liner install.

09/07/2025