01/10/2026
How to fix your paint with paint correction:
1. Chemical decontamination: Spray iron remover over the whole surface to remove embedded metal contamination; allow it to dwell and keep from drying, then rinse completely. 
2. Mechanical decontamination: Use a clay bar or synthetic clay with clay l**e to remove embedded contamination, leaving the surface smooth and ready to polish. 
3. Test spot: Try a section with your intended pad and polish combo to decide pad/polish combinations. 
4. Apply polish: Apply a few drops of polish to the pad, spread on the panel, then work in a crosshatch pattern with moderate pressure. 
5. Refine: Use a softer pad/finishing polish to remove haze and boost clarity if needed. 
6. Protection: Wipe down with panel prep or IPA, then apply a ceramic spray or sealant to lock in your work and add protection. 
How to Deep Clean Interior with Steam Cleaning
1. Collect supplies: Use a high‑quality pH neutral interior cleaning product safe on multiple surfaces. 
2. Clean all surfaces: Spray the cleaner liberally, scrub harder surfaces with a fine‑bristle brush, use air compressor attachments to loosen debris, remove inserts to clean below, and wipe down with microfiber towels. 
3. Steam disinfect: After cleaning, use hot steam to remove cleaner residue and kill microbes/bacteria; avoid oversaturating surfaces and use fresh microfiber towels. 
4. Leather materials: Spray leather cleaner, agitate with a brush, steam to loosen debris/disinfect, then wipe clean with fresh microfiber towel. 
5. Interior vacuum: Remove floor mats and vacuum flooring, seats, and all crevices before or after steam depending on debris level. 
6. Vent and difficult areas: Use compressed air/steam in vents and hard‑to‑reach spaces to dislodge dirt; wipe with microfiber.