Uni Graphic 新圖藝科技設備有限公司

Uni Graphic 新圖藝科技設備有限公司 公司提供無水平板、平版製版、網版製版、光碟製版、濕製程零組件、uv設備、自動化設備

UG-400E Waterless processor(UG-600CT)Printing method Roller transport system / pretreatment soaking → revolving brush de...
05/05/2023

UG-400E Waterless processor(UG-600CT)

Printing method Roller transport system / pretreatment soaking → revolving brush development → after-treatment dyeing → washing in water

Processing Pretreatment (CP-Y,NP-1,CP-1) → developing (tap water With brush) → after-treatment (PA-F with brush) → washing in water (tap water with brush)

Plate size: Max. plate width： 550 mm, Thickness of plate： 0.15-0.4 mm
Speed setting: 20~50CM/MIN
Temp. setting: Pre-treatment solution：normal temp.~60℃
After-treatment solution：Normal temp.
Capacity Of chemicals:Pre-treatment solution 15L after-treatment solution 10L
Machine size: 103(w)*160(L)*110(H) cm
Wooden case size:118*175*135cm
NetWeight: 280kgs
Gross weight: 472kgs

Electric Power:220 — 240 VAC Single phase 50/60 Hz 2.8 KVA.

FEATURE:
●the newest processing procedure includes Pretreatment (CP-Y,NP-1,CP-1) → developing (tap water With brush) → after-treatment (PA-F with brush) → washing in water (tapwater with brush)
●cool pressure drying device to make sure for no particle on the plate
●full automatic water-level control system for treatment liquid replenishes and low water-level warning light for treatment-liquid
●automatic percolation recycle device for cleaning water and has automatic clean water replenish function
●Three set of brush, rolling and go bank and operation to make sure the best result of procedure it can produce 2%~98% re-appear of the fine screen dot
●independent configuration of chemical tank for convenient management and it is very easy for cleaning of the whole machine terrace
●multi-function operation panel design easy to control and it has one-step procedure operation system
●it provides plate feedback design for the deflection of the plate input
●module design of the mechanical electronic circuit board easy to maintenance low malfunction rate

#無水平版 #光碟 #智慧卡片 #悠遊卡 #金融卡 #信用卡 #特殊印刷 #網版 #傳統平版 #標籤 #標籤機

直噴機改裝吸氣平台
10/12/2019

直噴機改裝吸氣平台

Conventional plate processor JXD860-14001. Develops-washing-gumming-dry complete processing2. Reentry wash and gum after...
23/10/2019

Conventional plate processor JXD860-1400

1. Develops-washing-gumming-dry complete processing
2. Reentry wash and gum after deletions.
3. Auto sensor operated process timing
4. Variable processing speed-temperature control.
5. Develop brush easy to moving for cleaning.
6. PLC controller LCD display, The display provides an easy read-out of all automatic function such as: replenishment, speed, plate counter, maintenance date and adjustable temperature of developer and dryer.
7. Completely submerge system.
8. Precise CTP used brush.
9. Developer fully circulation.

CTP plate processor MXT880~1400• PLC controlled with LCD panel display• Development by immersion negative or positive, t...
23/10/2019

CTP plate processor MXT880~1400

• PLC controlled with LCD panel display
• Development by immersion negative or positive, thermal or conventional subtractive plates
• Dual soft bristle brushes (or covers) in developer, independently driven with programmable rpm.
• Wash brush
• Low developer and finisher replenishment warning
• Entrance assist roller for small plates when on-line
• Intermediate rollers for transporting small plates
• Intermediate rollers for transporting small plates
• Chiller
• 2nd entry slot for rewash and finishing
• Reverse drive function
• Conserves chemistry and water
• Ease of maintenance
• Convenient access to all serviceable components
• Quiet operation

WATERLESS PLATE PROCESSOR UG-400FEATURE:●the newest processing procedure includes pre-treatment→developing portion→after...
23/10/2019

WATERLESS PLATE PROCESSOR UG-400
FEATURE:
●the newest processing procedure includes pre-treatment→developing portion→after treatment→water washing portion→coll drying
●cool pressure drying device to make sure for no particle on the plate
●full automatic water-level control system for treatment liquid replenishes and low water-level warning light for treatment-liquid
●automatic percolation recycle device for cleaning water and has automatic clean water replenish function
●double set of brush,rolling and go bank and operation to make sure the best result of procedure it can produce 2%~98% re-appear of the fine screen dot
●independent configuration of chemical tank for convenient management and it is very easy for cleaning of the whole machine terrace
●multi-function operation panel design easy to control and it has one-step procedure operation system
●it provides plate feedback design for the deflection of the plate input
●module design of the mechanical electronic circuit board easy to maintenance low malfunction rate

Waterless plate processor (CTP－TAC or TAN )MODE:UG-600CTProcessing :Pre-treatment＞developing portion＞After-treatment> wa...
23/10/2019

Waterless plate processor (CTP－TAC or TAN )
MODE:UG-600CT
Processing :Pre-treatment＞developing portion＞
After-treatment> water washing portion.>squeeze
Max Plate width:600mm
Min Plate width:180*100mm
Thickness of plate:0.15~0.35mm
Power source:220v 20a single phase
Size of machine:1150(W)*1700(L)*880(H)mm
Net weight:255kgs

10/12/2016

進紙設備用於各種產業，我們可以客製化，為你的需要設計，02-29877188

Address

安慶街136號
Xinbei
241

Opening Hours

Monday 09:00 - 17:00
Tuesday 09:00 - 17:00
Wednesday 09:00 - 17:00
Thursday 09:00 - 17:00
Friday 09:00 - 17:00

Telephone

+886229877188

Website

Alerts

Be the first to know and let us send you an email when Uni Graphic 新圖藝科技設備有限公司 posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Uni Graphic 新圖藝科技設備有限公司:

Shortcuts

Share