Marble Polishing Specialist - Singapore

13/04/2026

ETCHED COMPRESSED MARBLE

Agglomerated (compressed) marble tiles are a composite material produced by binding marble chips with formulated resin. Hence, its presence of calcium carbonate minerals in the compressed marble will response to acidic liquid in manner of blurring. This surface chemical corrosion is known as etching.

Polisher’s perspective, be to re-surface the stone with coarse abrasive to rid the affected corroded top layer. Thereafter, refining with sequential fine grit abrasives is essential to close up the pores of stone providing the treated surface a better resistant against future etching.

Users tip: Should opportunity present, down right at the moment upon realisation of etching, users should immediately clean/sponge up such acidic liquid spill. (Avoid big “swing” cleaning so to not widen the problem) With caution of slipping, then pour a layer of tap water over the surface, let it sit for 10 to 15 minutes before drying. This do-it-yourself procedure essentially neutralise the acidity hoping the etching is tone down or mild. If it isn’t visible, lucky you. Else a re-polishing treatment is required. Fingers crossed.

We Care, We Share!

Aaron Ang
Director
Polishing Specialist Private Limited
UEN: 202400039Z
Mobile: https://wa.me/6597677169
Website: https://PSPL.sg

12/04/2026

06/04/2026

Pebble Bay Condo

A project completed in 1998 by CapitaLand, decorated extensively with a variety of marble from all around the world. Rosso Verona from Italy, Verde Acceglio, Rojo Alicante from Spain…

Such meticulously marble plotting, pattern and workmanship are no longer existence in Singapore’s new developments today.

Experienced owners who have seen through the decades of Singapore’s building & construction will understand how desirable these gems/projects are.

Our pleasure and joy to serve!

Aaron Ang
Director
Polishing Specialist Private Limited
UEN: 202400039Z
Mobile: https://wa.me/6597677169
Website: https://PSPL.sg

26/03/2026

STUN MARKS

Deep scratches that had travelled through the thickness of marble, are known as stun marks. Stun marks appear as white scars on the marble surface. They are result from heavy pin point pressure impacting the marble surface, creating tiny crystal explosion that travel into the slab.

Improvement can be make through coarse diamond abrasive re-surfacing procedure, which may remove or alleviate the stun marks.

Aaron Ang
Director
Polishing Specialist Private Limited
UEN: 202400039Z
Mobile: https://wa.me/6597677169
Website: https://PSPL.sg

14/03/2026

INVADER!

Rising Ground Moisture, from whether a leak in the waterproofing membrane or surrounding water feature etc. enable dust and dirt to adhere onto the moist marble surface. Overtime accelerating dust and dirt buildup/layering, creating blemish.

Worst, Efflorescence - should any material like stone or substrate, internally possesses salt. The moisture will dissolve and migrate the salt through the porous material, on to the surface, then evaporates, depositing layers of white salt.

While we can’t correct the bottom up fundamentals, top down surface treatment(s) shouldn’t be neglected.

Here at PSPL, we provide the best solutions to tackle your marble every problems.

Aaron Ang
Director
Polishing Specialist Private Limited
UEN: 202400039Z
Mobile: https://wa.me/6597677169
Website: https://PSPL.sg

03/03/2026

The PSPL Experience

Aaron Ang
Director
Polishing Specialist Private Limited
UEN: 202400039Z
Mobile: https://wa.me/6597677169
Website: https://PSPL.sg

27/02/2026

The PSPL Experience!

Comprising:
- pre-polishing consultation, advise, assessment
- protection setup
- actual polishing + treatment
- clean up
- post-polishing handover, maintenance tips

We have the Best Solution for Your Marble!

Aaron Ang
Director
Polishing Specialist Private Limited
UEN: 202400039Z
Mobile: https://wa.me/6597677169
Website: https://PSPL.sg