What are the opening hours?

Monday 9am - 5pm Tuesday 9am - 5pm Wednesday 9am - 5pm Thursday 9am - 5pm Friday 9am - 5pm

SoftWash UK

Name: SoftWash UK
Address: 137 Brevig, Isle of Barra, Outer Hebrides, HS95UN, GB
Telephone: +443335670531
Price range: $

Call Directions Website Contact the business

SoftWash UK | Founded by Mark Cave
Professional softwashing chemicals, equipment & CPD certified training. Trusted by contractors since 2013

Helping exterior cleaning businesses across the UK with safe, compliant and effective softwashing systems.

03/11/2026

The right injector starts with knowing which chemical you are using.

If you are planning equipment for DDAC work, the Dosatron Biocide Injector is the product to ask SoftWash UK about. It is the separate, smaller injector used for DDAC, rather than the Clever Injector used for sodium hypochlorite.

That distinction matters when comparing equipment or preparing an order. Similar product categories do not mean interchangeable chemical compatibility, and choosing by name or appearance alone is not a sound basis for equipment selection.

A useful practical takeaway: put the intended chemical and the full injector name together on your equipment checklist. Before purchase or use, check the product instructions and confirm any setup requirements rather than relying on assumptions from another injector.

SoftWash UK supplies chemicals, equipment and professional training, including the Dosatron Biocide Injector.

View the product below and contact the team with your equipment questions:
https://www.softwashing.uk/products/dosatron-biocide-injector-d07re5afv

What information do you always want confirmed before adding an injector to your setup?

03/11/2026

A wet ‘after’ photo can create expectations that the dry result cannot support.

Water changes how an exterior surface looks. Colour can appear deeper, while some marks and uneven areas become harder to judge. Put that image next to a dry ‘before’ and customers are not seeing a like-for-like comparison.

That matters when homeowners use your photographs to decide what a clean could achieve on their own property.

A practical approach is to take your baseline photographs before work starts, then capture the finished surface once it is dry. Keep the viewpoint, distance and lighting as consistent as reasonably possible.

If you need to photograph the job while it is still wet, label the image as a progress shot rather than presenting it as the final dry result. Where practical, arrange a return visit for your finished photographs.

Honest presentation gives customers a clearer understanding of your work and helps protect your professional reputation.

How do you manage final photographs when drying time runs beyond the end of the job?

Visit SoftWash UK’s Knowledge Hub for more practical exterior cleaning guidance:
https://www.softwashing.uk/pages/softwashing-knowledge-hub

03/11/2026

The same cleaning service can involve very different site risks.

A quiet residential driveway and a busy commercial entrance may need different access arrangements, pedestrian controls and working sequences. Your paperwork should reflect those differences.

The Risk Assessment and Method Statement Pack from SoftWash UK is an option to consider when organising RAMS documentation for exterior cleaning work. The important part is how that documentation relates to the job you are actually planning.

Before work starts, compare your risk assessment and proposed method with the site. Consider who could be affected, how the area will be managed and what needs reviewing if circumstances change.

A useful habit: walk through the planned sequence with the people doing the work. If the paperwork and the practical plan do not match, resolve that before starting. Purchasing a pack alone does not establish that a job is safe or that every requirement has been met.

Which site detail most often changes your working method?

View the Risk Assessment and Method Statement Pack and consider it for your documentation process:
https://www.softwashing.uk/collections/softwash-chemicals/products/risk-assessment-method-statement-rams-exterior-cleaning

03/11/2026

Wand marks and black spot callbacks: two concerns worth keeping in focus when restoring Indian sandstone.

Today’s Mark Cave Softwashing Podcast episode, “Restoring Indian Sandstone Without Wand Marks or Black Spot Callbacks”, puts that specific restoration challenge at the centre of the conversation.

Which has been the bigger challenge in your experience: wand marks or black spot callbacks?

Listen to today’s episode and explore the full Mark Cave Softwashing Podcast library at the Podcast Hub: https://podcast.softwashing.uk

03/11/2026

Not every tired-looking timber surface needs the same treatment.

Before reaching for a product, it pays to understand what you are working with. Timber type, existing coatings and the condition of the surface all matter when planning exterior wood care.

Wood X Pro is a wood brightener available from SoftWash UK. It is worth considering when brightening is the requirement, rather than assuming that every timber-care job calls for the same cleaning approach.

The practical takeaway is simple: separate the assessment from the application. Identify the surface, check the product guidance and test a small, inconspicuous area before deciding how to proceed. Do not assume that instructions for another product apply to Wood X Pro.

For contractors, that also gives you a clearer basis for discussing the proposed work with your customer. For property owners, it is a useful reminder to ask what treatment is being proposed and why.

What information do you gather before choosing a timber-care product?

View Wood X Pro below, or contact SoftWash UK for product guidance.

https://www.softwashing.uk/collections/softwash-chemicals/products/wood-x-pro-ready-to-use-wood-brightener

03/11/2026

Buying a nozzle for your water fed pole? Start with the setup you already have.

The Water Fed Pole Softwash Nozzle from SoftWash UK is worth considering when planning equipment for pole-based softwashing. The important question is not simply whether you need a nozzle, but whether this product suits your intended setup and work.

Before ordering, make a short checklist: identify your pole, note how your system is configured, and check the available product information. If a connection or suitability detail is unclear, ask rather than assume.

That preparation gives you a clearer basis for an equipment purchase. It also keeps the nozzle decision separate from other essential checks, including surface suitability, chemical instructions and site-specific working arrangements.

Practical takeaway: have your existing equipment details ready when enquiring about the Water Fed Pole Softwash Nozzle. A specific question is more useful than asking whether it will fit “a standard pole”.

What information do you always check before adding a nozzle to your kit?

View the product and contact SoftWash UK with your setup questions:
https://www.softwashing.uk/collections/soft-washing-equipment/products/water-fed-pole-softwash-nozzle

03/11/2026

Adding softwashing to your services? Put training on the checklist before adding another piece of kit.

The SoftWash UK Approved Applicator Programme is worth considering when planning your professional development. Choosing chemicals and equipment is only part of building an exterior cleaning service. Deciding what you need to learn deserves its own time and budget.

Before enquiring about the programme, make a short list of the areas where you currently need guidance. These might be questions raised by previous jobs, unfamiliar product information or the practical decisions involved in quoting for new work.

Then use that list to ask focused questions about the programme. Check the published details and confirm that the offering matches your experience and learning priorities, rather than assuming every course covers the same ground.

The practical takeaway: start with your learning needs, then assess the training. That gives you a clearer basis for deciding what to book.

What matters most to you when choosing professional exterior cleaning training?

View the SoftWash UK Approved Applicator Programme and contact us with your questions:
https://www.softwashing.uk/products/softwash-training-course

02/11/2026

An injector purchase should start with one question: which chemical are you using?

The Clever Injector is the injector used for sodium hypochlorite. If you are reviewing equipment for that chemical, it is the relevant product to discuss with SoftWash UK.

Do not confuse it with the Dosatron Biocide Injector, which is the separate, smaller injector used for DDAC. Similar equipment categories do not mean interchangeable chemical compatibility.

A practical approach is to prepare a short checklist before you order: the exact chemical, your existing equipment and the questions you need answered about the proposed setup. Keep the relevant product instructions and chemical handling guidance available as well.

That gives you a clearer purchasing conversation without relying on assumptions about what an injector can handle. It also helps keep equipment selection tied to the work you actually plan to carry out.

What information do you always check before adding an injector to your kit?

View the Clever Injector, then contact SoftWash UK with your equipment requirements:
https://www.softwashing.uk/products/clever-injector

02/11/2026

A quiet communal entrance can become busy halfway through a cleaning job.

That is why access arrangements need to reflect how a property is used, not just how it looks when you arrive.

On shared sites, residents may leave for work, carers may need entry and deliveries may arrive without warning. Your cleaning plan needs to account for those everyday movements.

Before softwashing begins, speak with the person responsible for the site. Identify who needs access, which routes could be affected and how temporary restrictions will be communicated.

Where a suitable alternative route is available, make it clear. If access cannot be controlled safely, reassess the work rather than expecting people to find their own way around it.

The practical takeaway: walk the approach to your work area from a visitor’s perspective. Are the boundaries obvious before someone reaches the affected space?

What has helped you manage access on flats, communal paths or occupied commercial premises?

Share this with a colleague planning a shared-site clean, and explore SoftWash UK’s RAMS resource:
https://www.softwashing.uk/collections/softwash-chemicals/products/risk-assessment-method-statement-rams-exterior-cleaning

02/11/2026

A rust mark is a reason to reassess the stain, not simply repeat the same cleaning process.

Rust X Pro is a rust stain remover supplied by SoftWash UK. When rust staining is the issue, it gives you a product to assess specifically for that task rather than choosing a treatment solely because it is already on the van.

Start with the basics: what is the surface, what is the likely source of the stain, and what do the product instructions say about suitability? Do not assume that every orange or brown mark has the same cause.

A practical takeaway: make a small, inconspicuous test area part of your assessment before committing to wider treatment. Use that assessment to set realistic expectations with the customer, without promising a particular result in advance.

Which part of rust stain assessment tends to cause the most questions on your jobs?

View Rust X Pro and check the product information before planning your next rust stain removal task:
https://www.softwashing.uk/products/rust-x-pro-rust-stain-remover

Address

137 Brevig, Isle Of Barra
Outer Hebrides
HS95UN

Opening Hours

Monday	9am - 5pm
Tuesday	9am - 5pm
Wednesday	9am - 5pm
Thursday	9am - 5pm
Friday	9am - 5pm

Telephone

+443335670531

Website

https://www.softwashing.uk/pages/links

Alerts

Be the first to know and let us send you an email when SoftWash UK posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.