ISR Laser

Directions Website Contact the business

Mobile material recovery service using laser technology on graffiti, oxidisation rust and stains in concrete and steel. Travel
March.

Warwick, Coventry, Basingstoke, Edinburgh Berwick.

25/10/2026

Another restoration challenge for ISR Laser!

Recently, we had the opportunity to work alongside a motorcycle restorer, recovering delicate brass filters using laser cleaning.

As you can see in the video, the laser works without physically touching the filters, helping remove unwanted contamination while preserving the original components.

It’s a great example of how laser cleaning can be used on delicate parts where traditional cleaning methods may be too aggressive.

Watch this space!
Next week, we hope to share another clip showing chrome removal to prepare a surface for painting.

Have a restoration project with parts that need careful attention? Get in touch with ISR Laser to see what we can do.

ISR Laser – Protect, Maintain, Enjoy.

02/10/2026

A recent project that perfectly demonstrates the advantages of laser cleaning.

ISR was recently asked to restore what was believed to be the only front panel the owner could source for a Chevrolet restoration project, making precision absolutely critical.

Using our laser cleaning technology, we were able to achieve outstanding results with:

1. No knuckle-rash
2. The panel remaining cool throughout the process no material
changes
3. No removal of parent material
4. A consistent, uniform finish, even in difficult-to-reach areas
5. No waste created

When irreplaceable components are involved, laser cleaning offers a level of control, precision and surface preservation that conventional methods simply cannot match.

If you have a restoration, engineering, or industrial cleaning challenge, get in touch to see how ISR can help

30/09/2026

Bring back the kerb appeal and remove the stains from your block paving and patio with ISR.

29/09/2026

Why laser clean an engine instead of blasting it?

The main advantage of laser cleaning is that it leaves no abrasive media or solid contaminants behind inside the engine. With blasting methods, there is always a risk that particles of shot, grit or other blasting media can remain trapped within the engine, even after thorough cleaning.

If just one piece of abrasive material is left behind and enters the oil system, it can circulate through the engine and cause premature wear or damage to critical components. This is a real risk if the seller or long term user is keeping the vehicle.

What finish does laser cleaning leave?
The finish depends on the type of laser used:

✅ Continuous-wave lasers typically leave a matt finish. They are designed to remove heavy contamination, coatings and corrosion efficiently.

✅ Pulsed lasers generally leave a brighter, more polished finish on engine components. Because they operate with lower heat input, they offer greater control and can produce a cleaner cosmetic finish while still removing contaminants effectively.

Laser cleaning provides a safe, precise and environmentally friendly solution for engine restoration, preserving the underlying material without introducing abrasive residue,

After cleaning a number of engines recently please advise as its something we are looking at long term. Should you have a need to laser clean an engine please come to us as a path forward.

21/09/2026

Attached is a clip from a recent project, cleaning components destined for a rebuild.

Many classic car and machinery parts spend years in storage and often show signs of corrosion, contamination, and surface deterioration. In many cases, traditional methods such as blasting, grinding, or aggressive mechanical cleaning simply aren't suitable due to the shape, complexity, or delicate material of the component.

This is where laser cleaning comes into its own. The video demonstrates how laser technology can safely and effectively remove contamination while preserving the underlying surface, making it an ideal solution for classic vehicle restoration, specialist engineering, and in-situ cleaning applications.

If you, your club, or your restoration group have parts in storage that need attention, send us a photograph and we'll be happy to review them and advise on the most suitable cleaning approach.

📍 We are currently undertaking projects across the North East, North West, Scotland, and North Yorkshire.

ISR – Instant Surface Recovery
Precision laser cleaning for restoration, engineering, and industrial applications.

26/08/2026

ISR recently carried out laser cleaning on a 1967 VW Beetle, stripping the affected areas back to bare metal so the vehicle could be fully assessed before welding and painting.

The process revealed the true extent of the work required without causing further damage. Unlike traditional blasting methods, laser cleaning leaves no dust, debris or residual media behind, providing a clean surface ready for the next stage of restoration.

If your vehicle is showing signs of distress and could benefit from a laser clean, contact ISR sending photos of the affected areas so we can assess the extent of the work.

16/08/2026

Bringing Engineering Systems Back to Life with Precision Laser Cleaning

ISR recently completed a specialist cleaning project inside a mill, removing baked‑on heating oil and lubricant from production rollers. With only a limited power supply available on site, we adapted our process and— for the first time— used a targeted chemical pre‑treatment to enhance laser performance. A valuable lesson learned, and a demonstration of how flexible laser cleaning can be when conditions are challenging.

If you operate machinery, plant, or engineered systems that require cleaning, ISR offers a fully mobile service that can often eliminate the need for disassembly. In this case, the rollers shown were dismantled solely for bearing replacement, not for cleaning.

Laser cleaning provides a controlled, non‑abrasive method that protects components, reduces downtime, and keeps critical equipment in service.

If you’d like to explore whether laser cleaning could support your maintenance or recovery needs, ISR can assess your system and provide clear guidance on suitability and cost.

31/07/2026

A great milestone for ISR this week — we’ve begun restoring a Ford Model T 4‑splash sump pan. Laser cleaning delivered a safe, precise solution that protected both the original steel and every brass seal, avoiding the costly rework blasting would have created. When parts are this rare, precision matters.

25/07/2026

Ceased Parts Recovery Without Disassembly
ISR’s laser systems enable ceased‑parts recovery without full disassembly, a capability that conventional recovery methods simply cannot match. When components stop functioning as designed, ISR is frequently called upon to restore operation quickly and safely. Here we see a Ford bonnet catch recovered along with screws to allow replacement as built with is mandatory to may restorers.

The extended reach of the laser is a major advantage. It allows technicians to access and treat internal surfaces, interfaces, and assemblies without stripping down equipment, avoiding the labour, downtime, and cost normally associated with mechanical disassembly. For industry, this represents a significant cost saving and a dramatic reduction in operational disruption.

Beyond recovery, the same reach is used to clear stoppages, free bearing assemblies, and remove contamination in areas that would otherwise require intrusive intervention. This makes ISR’s laser process a uniquely efficient solution for maintaining and restoring critical assets.

19/07/2026

Our first ever special offer on driveway and patio stain removal. £150 per patch to north east. Message and WhatsApp we are monitoring when mobile. 8am till late. Remember anyone selling a house will need the drive clean to avoid reduction in asking price, or they may just wish to bring back that kerb appeal.

Address

15 Front Street, Durham DH6 1PA , Reg Office Address
Newton Aycliffe
DL56ZE

Website

http://www.isrlaser.com/

Alerts

Be the first to know and let us send you an email when ISR Laser posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.