Moor Floor Finishes

Moor Floor Finishes Manufacturers of Floor Seals, Polishes and Cleaning Products for all Wood and Sports Hall Flooring. Commercial and Domestic. Adhesives, Abrasives, etc

Well done šŸ‘šŸ»
05/04/2020

Well done šŸ‘šŸ»

10/03/2020

Granwood Community Centre Floor Sanding and Sealing by Floorcare Services using Moor Floor Finishes products. 126 sqm of Granwood Composite Block Flooring, Renovated by Floorcare Services (Time Lapse video 70). This Maple Wood buff colour, Composite Block floor was sanded back to bare wood removing the previous finish / seal / varnish, wear marks, scratches,and Sealed with 3 coats of Moor Floor Finishes (formally Floortech Products) – New Sportguard a solvent based moisture cured polyurethane commercial grade floor seal conforming to EN BS 14904 Slip resistance for indoor sports play. Cracks in the floor were also repaired via the means of filling. This Community Centre Floor was refurbished in a total of 4 days only.
-------------------------
Visit our online shop @
www.moorfloorfinishes.co.uk or
www.moorfloorfinishes.com
( formally - www.floortechproducts.co.uk )
-------------------------
To find/purchase all the materials used on this project :
-------------------------
* 8" (200mm x 750mm) sanding belts,
* 6' / 150mm discs
* 17" / 430 Mesh Sandscreen Discs
* Applicator Pads
* New Sportguard Polyurethane Floor Seal, Gloss Finish
-------------------------
All came from us Moor Floor Finishes
-------------------------

Check out our latest Moor Floor Finishes - Time Lapse project on YouTube
10/03/2020

Check out our latest Moor Floor Finishes - Time Lapse project on YouTube

Granwood Community Centre Floor Sanding and Sealing by Floorcare Services using Moor Floor Finishes products. 126 sqm of Granwood Composite Block Flooring, R...

Take a look at the latest New Sportguard Video
02/03/2020

Take a look at the latest New Sportguard Video

School Floor Sanding and Refinishing by Floorcare Services using Moor Floor Finishes products. 112 sqm of Hardwood Mosaics Flooring, Restored by Floorcare Se...

10/02/2020

18 sqm of Oak Strip Hardwood Domestic Floor Sanding & Sealing by Floorcare Services (Time Lapse video 68). This residential Oak floor sand & seal was in Darley Dale, Derbyshire. It was sanded back to bare wood and Sealed with coat 1, a barrier seal from ā€˜Moor Floor Finishes (formally Floortech Products) - Pre-Seal’, followed by 2 coatings of ā€˜Moor Floor Finishes – Waterthane’, a water based commercial grade polyurethane floor seal, Satin finish.
This domestic Floor was completed in a total of 2 days only, just 5 hours on day 1 to sand and apply 2 coats and 45 minutes on day 2 to apply coat 3.
*
Visit our online shop @ www.moorfloorfinishes.co.uk or www.moorfloorfinishes.com formally www.floortechproducts.co.uk
*
To find/purchase all the materials used on this project :
*
* 8" (200mm x 750mm) sanding belts,
* 6' / 150mm discs
* 17" / 430 Mesh Sandscreen Discs
* Applicator Pads
* Preseal
* Waterthane Polyurethane Floor Seal, Satin Finish
*
All came from us Moor Floor Finishes (formally Floortech Products).
*
For contracting / sanding service info please visit www.floorcareservices.co.uk
*

Check out the newest video of Pre-Seal & Waterthane
04/02/2020

Check out the newest video of Pre-Seal & Waterthane

18 sqm of Oak Strip Hardwood Domestic Floor Sanding & Sealing by Floorcare Services (Time Lapse video 68). This residential Oak floor sand & seal was in Darl...

15/06/2019
We’ve changed our name!Floortech Products is now Moor Floor Finishes.
19/05/2019

We’ve changed our name!
Floortech Products is now
Moor Floor Finishes.

21/03/2019

Cleaning, Machine Scrubbing, Abrading & Re-sealing by Floorcare Services using Moor Floor Finishes products. (Time Lapse video 67). 178 sqm of Hardwood Maple Village Hall Flooring, Chemically Stripped, Cleaned, Scrubbed, Abraded and Re-sealed at Barton Under-Need-Wood, Derbyshire. We Performed this same process April 2007 (11 ½ years ago) with 2 coats of Moor Floor Finishes (formally Floortech Products) – ā€˜Original Sportguard’ so it was ready for some more TLC. It was Cleaned / Scrubbed and Abraded then Sealed with 2 coats of Moor Floor Finishes – ā€˜New Sportguard’ a solvent based moisture cured polyurethane commercial grade floor seal conforming to EN BS 14904 Slip resistance for indoor sports play. The second/final coat was applied the following day/ day 2. As it wasn’t sanded there was no dust, no material removed from the floor and only took 2 days to complete, just 4 hours on day 1 to sand and apply coat 1, and 45 minutes on day 2 to apply coat 2.
*
Visit our online shop @ www.moorfloorfinishes.co.uk or www.moorfloorfinishes.com formally www.floortechproducts.co.uk
*
To find/purchase all the materials used on this project :
*
*17" / 430 Mesh Sandscreen Discs
* Neutral Floorclean
* Applicator Pads
* 1.5ā€ Paint Brushes
* New Sportguard Polyurethane Floor Seal, Gloss Finish
*
All came from us Moor Floor Finishes formally Floortech Products.
*
For contracting / sanding service info please visit www.floorcareservices.co.uk
*

20/03/2019

Cleaning, Machine Scrubbing, Abrading & Re-sealing by Floorcare Services using Moor Floor Finishes products. (Time Lapse video 67). 178 sqm of Hardwood Maple...

Cleaning, Machine Scrubbing, Abrading & Re-sealing by Floorcare Services using Moor Floor Finishes products. (Time Lapse...
20/03/2019

Cleaning, Machine Scrubbing, Abrading & Re-sealing by Floorcare Services using Moor Floor Finishes products. (Time Lapse video 67). 178 sqm of Hardwood Maple Village Hall Flooring, Chemically Stripped, Cleaned, Scrubbed, Abraded and Re-sealed at Barton Under-Need-Wood, Derbyshire. We Performed this same process April 2007 (11 ½ years ago) with 2 coats of Moor Floor Finishes (formally Floortech Products) – ā€˜Original Sportguard’ so it was ready for some more TLC. It was Cleaned / Scrubbed and Abraded then Sealed with 2 coats of Moor Floor Finishes – ā€˜New Sportguard’ a solvent based moisture cured polyurethane commercial grade floor seal conforming to EN BS 14904 Slip resistance for indoor sports play. The second/final coat was applied the following day/ day 2. As it wasn’t sanded there was no dust, no material removed from the floor and only took 2 days to complete, just 4 hours on day 1 to sand and apply coat 1, and 45 minutes on day 2 to apply coat 2.
*
Visit our online shop @ www.moorfloorfinishes.co.uk or www.moorfloorfinishes.com formally www.floortechproducts.co.uk
*
To find/purchase all the materials used on this project :
*
*17" / 430 Mesh Sandscreen Discs
* Neutral Floorclean
* Applicator Pads
* 1.5ā€ Paint Brushes
* New Sportguard Polyurethane Floor Seal, Gloss Finish
*
All came from us Moor Floor Finishes formally Floortech Products.
*
For contracting / sanding service info please visit www.floorcareservices.co.uk
*

@ Barton Under Needwood

Address

Belper
DE561UX

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm
Saturday 9am - 12pm

Telephone

+441773828111

Alerts

Be the first to know and let us send you an email when Moor Floor Finishes posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Share