CF Ceramics Ardrossan

30/05/2026

Those of you that know me,know I’m Partial to an Aprilia so in this weekend Scott’s 2025 Aprilia RS 660 Factory. A little track weapon.
Prewashed,rinsed,snow foamed and rinsed,2 bucket wash, blow dried then fully decontaminated and then machine polished to remove scratches and wash induced swirl marks to take our 3 year Bike Ceramic Supreme coating via airbrush, anti-corrosion, heat resistant to 1000ºC C, airbrushed to all areas of the motorcycle for total protection. This includes: paintwork, engine, exhaust, suspension, wheels, brake calipers, lighting, instrument panel, forks and frame. Now fully protected without the need for oily greasy sprays for protection.
Bike Ceramic Supreme, the best protection for your two wheels - not just a Car ceramic coating being used for motorcycles. Designed specifically for the needs of motorcycles.
Got a new bike or old? Get it protected with our range of bike specific coating.
To get a quote and book your motorcycle in, message us today See less See less

29/05/2026

Tomorrows job washed and ready to go 😁

23/05/2026

In this weekend John’s belter of a 2024 Kawasaki Ninja 1100 SX SE Performance. Might even get one myself.
Prewashed,rinsed,snow foamed and rinsed,2 bucket wash, blow dried then fully decontaminated and then machine polished to remove scratches and wash induced swirl marks to take our 3 year Bike Ceramic Supreme coating via airbrush, anti-corrosion, heat resistant to 1000ºC C, airbrushed to all areas of the motorcycle for total protection. This includes: paintwork, engine, exhaust, suspension, wheels, brake calipers, lighting, instrument panel, forks and frame. Now fully protected without the need for oily greasy sprays for protection.
Bike Ceramic Supreme, the best protection for your two wheels - not just a Car ceramic coating being used for motorcycles. Designed specifically for the needs of motorcycles.
Got a new bike or old? Get it protected with our range of bike specific coating.
To get a quote and book your motorcycle in, message us today See less

Call now to connect with business.

03/05/2026

Hi guys. I’ve been asked about polishing your bike after coating. You don’t. Once coated all you do is wash with ph neutral shampoo and dry. If you want to give it a wipe down just put a little shampoo in a litre spray bottle, fill with water and give it a wipe down. For customers who bought Alpha Retouch for this, unfortunately it has been discontinued but if you buy Alpha Foam Ceramic Shampoo it’s exactly the same. So a couple of cap fulls in a spray bottle with water and the Alpha Foam is super concentrated and will last a good couple of years. It’s available on the CFC website.

02/05/2026

In this weekend Tyler’s 2025 Yamaha MT-09 SP. A little worse for wear but I got it sorted.
Prewashed,rinsed,snow foamed and rinsed,2 bucket wash, blow dried then fully decontaminated and then machine polished to remove scratches and wash induced swirl marks to take our 2 year Bike Ceramic Supreme coating via airbrush, anti-corrosion, heat resistant to 1000ºC C, airbrushed to all areas of the motorcycle for total protection. This includes: paintwork, engine, exhaust, suspension, wheels, brake calipers, lighting, instrument panel, forks and frame. Now fully protected without the need for oily greasy sprays for winter protection.
Bike Ceramic Supreme, the best protection for your two wheels - not just a Car ceramic coating being used for motorcycles. Designed specifically for the needs of motorcycles.
Got a new bike or old? Get it protected with our range of bike specific coating.
To get a quote and book your motorcycle in, message us today

02/05/2026

Hi Troops, just a little post to make people aware of some issues with their bikes and how to avoid it happening. A lot of bike have been coming to me lately with corrosion on parts. These are usually brackets, banjo fittings on brake hoses, bolts and Allen screws. These parts are either anodised or electroplated, they are usually thinly coated and crap, they all start corroding from the inside out and are covered in a white powder. This is oxidisation coming through the coating. The only thing that can fix it is replace or rub down and paint. This seems to be on new bikes and not older ones. I’ve had bikes with 40 miles and a week old with this. Manufacturers are scrimping to save money on these parts. To try and prevent this on your bike, dry it after it’s been wet, after being in the rain or after washing. Don’t put it in the garage wet, big mistake. The worst seem to be Yamaha and BMW’ especially GS’s. Stainless fasteners have been substituted for cheap alloy. Invest in a cheap Motorcycle drier, £40 not a big outlay.

25/04/2026

In this weekend. Simon’s 2013 Ducati Streetfighter 848. Simon brought this bike home from Thailand after living there.
Prewashed,rinsed,snow foamed and rinsed,2 bucket wash, blow dried then fully decontaminated and then machine polished to remove scratches and wash induced swirl marks to take our 3 year Bike Ceramic Supreme coating via airbrush, anti-corrosion, heat resistant to 1000ºC C, airbrushed to all areas of the motorcycle for total protection. This includes: paintwork, engine, exhaust, suspension, wheels, brake calipers, lighting, instrument panel, forks and frame. Now fully protected without the need for oily greasy sprays for winter protection.
Bike Ceramic Supreme, the best protection for your two wheels - not just a Car ceramic coating being used for motorcycles. Designed specifically for the needs of motorcycles.
Got a new bike or old? Get it protected with our range of bike specific coating

Call now to connect with business.

18/04/2026

In this weekend Gav’s new 2025 Honda Rebel 1100. He’s toured most of Europe and is going to give the Rebel a go as a tourer so wanted it protected first.
Prewashed,rinsed,snow foamed and rinsed,2 bucket wash, blow dried then fully decontaminated and then machine polished to remove scratches and wash induced swirl marks to take our 3 year Bike Ceramic Supreme coating via airbrush, anti-corrosion, heat resistant to 1000ºC C, airbrushed to all areas of the motorcycle for total protection. This includes: paintwork, engine, exhaust, suspension, wheels, brake calipers, lighting, instrument panel, forks and frame. Now fully protected without the need for oily greasy sprays for winter protection.
Bike Ceramic Supreme, the best protection for your two wheels - not just a Car ceramic coating being used for motorcycles. Designed specifically for the needs of motorcycles.
Got a new bike or old? Get it protected with our range of bike specific coating.

16/04/2026

Hi folks. As we all know money is tight for everyone at the moment. For me the price of materials has gone up yet again across the board but for the second year in a row I am not raising my prices. I’m keep the current prices and will absorb the cost myself again, so getting your bike done isn’t going up. I hope this will help you make the decision a little easier. Cheers Tom

11/04/2026

Customer asked me if I could clean up and coat the wheels on his BMW GS. First my heart sank faster than the Titanic because the gold wheels are an nightmare but as I’ve done so many GS’s I’ve managed to to come up with a method that isn’t too bad, takes a while but I can bring them back if they aren’t completely wrecked.