Mike's Bikes and Classic Cars, Ringwood

03/06/2026

Then there was this one. Post cut, pre ultra-fine polish, a very acceptable improvement.

30/05/2026

Another one from the MBACCR archives

My advice on polishing your beloved machine goes something like this: If in doubt, don’t.

Fortunately, an acceptable correction was possible. If memory serves this was post swirl removal, pre ultra-fine polish.

28/05/2026

Five years ago before I graduated to black nitrile gloves, this project was one of my faves. I'm confident I could achieve better results now.

The upholstering was an interesting part. It was outsourced and came up perfectly. It's not generally something I take care of, but it can be done.

27/05/2026

People often ask what detailing products I use.

This is where I usually begin.

26/05/2026

Three years ago, assisted by the legends from RUPES Australia - making this was a blast.

Click and enjoy!

For Episode 3 in our Perfection Exceeded series, we visited Mike Ja...

20/05/2026

Lots of small businesses have been doing this, so I figured what the hell.

The good news is no changes will affect our clients 👍🏻

16/05/2026

This tail piece had a few wicked scars. I've minimised most of them. If your eyes are naked, the evidence is hard to find. It's been finished with Nxtzen Ceramic Professional, just for good measure. For what you might think was a small or simple project, it was anything but. But that's what I live for.

These improvements are acceptable.

16/05/2026

Post swirl removal, pre ultra fine polish. These results are certainly acceptable. It will be finished with a coating of Nxtzen Ceramic Professional.

15/05/2026

It’s a beautiful morning at MBACCR.

Today we have a special guest appearance from Mr Fluffy, riding our new Nano 2. Hit it, sir.

09/05/2026

If you want some kicks, this is where you’ll get them.

I’ll be sitting down soon at an operating bench to polish and ceramic coat this tail piece. Other bits will come later. Nxtzen, Nano, nice.