The Graffiti Eaters

03/08/2026

Graffiti ghosting 👻 faint shadowing left behind after an incomplete removal attempt, is more common than you'd think, especially when the wrong cleaning products or process get used. 😬

This brick wall had already been treated by another cleaner, but the result left visible shadowing where the tag used to be. A clear sign the graffiti substance was smeared around rather than fully lifted from the surface.

Our technician came, and treated it properly with one of our specialist graffiti cleaning solutions, fully removing every trace of the original tag. 💪

A graffiti removal job isn't done until it's done right.

Leave it to the pros. We'll get it off. 🙌

🌐 graffitieaters.com.au | 📞 1300 305 307

02/08/2026

Australia's most experienced graffiti removal and hard surface cleaning specialists since 1977. Serving Melbourne, Sydney, Brisbane, Adelaide and more.

01/08/2026

Big tag, bold colours, bare surface underneath. Graffiti removal jobs like this require special attention and the right removal process. 😅

Heavy graffiti on bare concrete or masonry isn't just a bigger version of a small tag. More paint means deeper pe*******on, more surface area to properly treat, and often more than one pass to get it all the way out. 😬

On every job, we assess the substrate, match the right specialist cleaning formulation to what's actually there, and treat it properly, dwell time, hot water pressure washing, repeat where needed. ✅

Big job or small, we do it right the first time. 💪

Learn More: graffitieaters.com.au/why-heavy-graffiti-on-bare-concrete-and-masonry-needs-special-attention

Heavy graffiti at your site? We'll get it off! 👊

📞 1300 305 307 | graffitieaters.com.au

01/08/2026

New coating on your concrete floor already peeling or bubbling? It's probably not the coating's fault. 😬

A coating can only bond to what's actually underneath it, and if that's oil, grease, or grime instead of clean concrete, it was never going to hold. The contamination doesn't disappear when you coat over it, it just gets sealed in, and it's usually only a matter of time before it shows.

Getting a concrete floor properly ready for coating means industrial-grade cleaning solutions to break down embedded contamination, hot water pressure washing to lift it out completely, and a proper look at cracks and surface condition before anything goes down. ✅

Skip the prep and you're not saving time, you're just paying for the coating twice. 💪

Learn More: graffitieaters.com.au/why-a-new-factory-floor-coating-will-fail-if-you-skip-the-cleaning-prep

Coating project on the horizon? We'll get your concrete floor ready. 👊

📞 1300 305 307 | graffitieaters.com.au

30/07/2026

Multiple graffiti tags across a petrol station sign. Not exactly great for business image. 😬

Perspex signage like this is a common graffiti target, and it's not a surface you want to attack with the wrong cleaning product. The wrong solution can cloud, scratch, or permanently damage perspex, turning a graffiti problem into a full sign replacement. 😩

Our technician carefully hand applied specialist graffiti cleaning solutions to lift every tag off this sign, without a mark left on the surface. 💪

Clear signage, back in business.

Leave it to the pros. We'll get it off. 🙌

🌐 graffitieaters.com.au | 📞 1300 305 307

#

---

Perspex and acrylic signage, like this petrol station price display, is a frequent graffiti target and one of the more sensitive surfaces to treat correctly.

Standard cleaning products and abrasive methods can cloud, scratch, or permanently damage perspex, resulting in a costly sign replacement rather than a straightforward clean. On this job, our technician applied specialist graffiti cleaning solutions by hand, carefully treating each tag to fully restore the sign's clarity without any surface damage.

For businesses relying on visible, legible signage, whether pricing displays, way-finding, or branding, prompt and correctly executed graffiti removal protects both the asset and the customer experience.

🌐 graffitieaters.com.au | 📞 1300 305 307

30/07/2026

Old line markings removed from a school play area, ready for a refresh.✨

We used specialist pressure washing equipment and attachments to strip the old painted numbers and markings back to bare concrete, clean and ready for new line marking to be applied. No surface damage, just a properly prepared surface. 💪

Getting this step right matters. Skip it or rush it, and new line marking won't bond properly or look sharp. Do it properly, and it sets the whole job up for a great result. ✅

Planning to update line markings on your playground, car park, or sports court?

Leave it to the pros. We'll get it off. 🙌

🌐 graffitieaters.com.au | 📞 1300 305 307

28/07/2026

28/07/2026

Mould and grime had been quietly building up on this wall for years, and it showed. 😩

Front walls, letterbox surrounds and boundary brickwork cop constant exposure to the elements, and mould, algae and general grime build up gradually until the whole thing looks dark, dirty and neglected. 😤

Our team used hot water pressure washing to strip back the build-up and bring the true colour of the brick back to life. 😍

Got a wall that's disappeared under years of grime? Give us a call. We'll get it off. 😉

📞 1300 305 307 | graffitieaters.com.au

25/07/2026

Graffiti tags on a train carriages should never just wiped off with whatever cleaning products are on hand. 🚆

Train carriages are covered in a protective coating system, that is built to fight off rust and corrosion for years. Use the wrong cleaner or go too hard with a pressure washer, and you can strip that protection without even realising it. 😬 Weeks later, bubbling paint, rust spots, a repaint bill nobody wanted.

The right approach matches the cleaning solution to the actual coating on the carriage. Graffiti gone, protection intact, train back in service. 💪

Learn More: graffitieaters.com.au/train-and-tram-graffiti-why-the-correct-removal-method-matters

If your rail assets have been hit by graffiti, we'll get it off!

🌐 graffitieaters.com.au | 📞 1300 305 307