28/05/2026
Hey everyone. I'm sorry it's all taking a lot longer than anticipated releasing WirelessWater. But I've hit an unforseen snag that cannot (at least by me) be resolved.
The problem is when you reel in, the hose compresses the water slightly inside the hose as it spools on the reel drum. This forces dribbles of water out of your brush head. Not much, but noticeable. I've tried check valves with high cracking pressure and a dump valve solution with no joy. If you disconnect before you reel in, this obviously stops it.
So my question is...... is it still worth moving forward with this, or is that slight flaw enough to put people off?
On a massive plus side, I've designed a tiny remote that fits on your finger next to your thumb. It is so easy to turn your flow on and off from any position your hands are in and your pole is bare from any remotes. And because that remote stays on your finger, it will operate all your poles. Also nothing needs to go on your pole for those that store them in tubes..... I know that was a big concern for quite a few of you.
ONE RING TO RULE THE POLE!
Anyway, essay over.... please give me your thoughts on the above.
CHEERS, DANNY.