Rukan Al Ausaf Technical Services LLC

Website

Rukan Al Ausaf Technical Services LLC Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Rukan Al Ausaf Technical Services LLC, Swimming pool & hot tub service, Arjumand Building, Royal Class 4th Floor Office 472, DIP – 1, Dubai.

Rukan Al Ausaf Technical Services LLC is a full-service professional engineering firm serving the construction industry in the field of painting, Leakage treatment,waterproofing systems, Epoxy flooring, and swimming pool works, Shotcrete/Guniting Works,

10/09/2026

# # CEMENTITIOUS WATERPROOFING WORKS

**Waterproofing & Protection Works – UAE | 2026**

Rukan Al Ausaf Technical Services L.L.C. (RTS) successfully carried out **cementitious waterproofing works**, providing a durable and reliable solution for protecting concrete and masonry surfaces against **water pe*******on, moisture, and seepage**.

The scope of work included thorough **surface preparation and cleaning**, removal of dust, loose particles, and contaminants, along with necessary treatment of cracks, joints, corners, and surface imperfections. The prepared substrate was properly dampened before application to ensure effective bonding of the waterproofing system.

The approved **cementitious waterproofing system was applied in multiple coats**, ensuring uniform coverage and the required thickness throughout the treated areas. Special attention was given to **wall-to-floor junctions, corners, construction joints, and other critical areas** to achieve a continuous and effective waterproofing barrier.

Following application, the treated surfaces were properly cured in accordance with the approved procedure and manufacturer’s recommendations. A final inspection was carried out to verify **coverage, adhesion, finishing, and overall workmanship quality**.

The works were successfully executed by the **RTS professional team** in accordance with proper **quality control and safety standards**, delivering a durable waterproofing solution designed to provide long-term protection against water ingress and moisture-related deterioration.

📞 **Project Inquiries:** +971 56 508 0259
📧 **Email:** [[email protected]](mailto:[email protected])

**Rukan Al Ausaf Technical Services L.L.C. (RTS)**
*Reliable Solutions • Quality Workmanship • Lasting Protection*

03/09/2026

**SWIMMING POOL WORKS**

**Swimming Pool Construction & Installation Project – Dubai, UAE | 2026**

In 2026, **Rukan Al Ausaf Technical Services L.L.C. (RTS)** successfully carried out specialized **swimming pool works** for a residential/commercial project in Dubai, UAE. The project involved complete pool construction and finishing activities, executed with careful attention to waterproofing, durability, functionality, and aesthetic quality.

The scope of work included **pool surface preparation, waterproofing treatment, plumbing and drainage connections, installation of filtration and circulation systems, pool tiling and grouting, installation of pool fittings and accessories, and final testing and commissioning**.

The pool structure and surfaces were carefully inspected and prepared before the waterproofing system was applied. Particular attention was given to joints, corners, pipe pe*******ons, and other critical areas to minimize the possibility of future water leakage.

Following waterproofing, the pool finishing works were carried out, including **tile installation, alignment, grouting, edge finishing, and installation of required pool accessories**. Filtration, circulation, and associated pool equipment were installed and connected to support proper water circulation and efficient pool operation.

After completion of the installation works, the swimming pool was thoroughly inspected and tested. Necessary **water testing, leakage checks, equipment testing, and system commissioning** were carried out to confirm proper operation and satisfactory performance.

Throughout the project, our technical team maintained **continuous site supervision, quality control, and safety compliance**. All activities were completed using suitable materials, skilled technicians, and professional workmanship in accordance with project requirements.

The successful completion of the **swimming pool works** demonstrates the capability of **Rukan Al Ausaf Technical Services L.L.C. (RTS)** in swimming pool construction, waterproofing, tiling, filtration systems, pool rectification, and specialized technical services across the UAE.

📞 **Project Inquiries:** +971 56 508 0259
📧 **Email:** [[email protected]](mailto:[email protected])

03/09/2026

RENOVATION & REFURBISHMENT WORKS

Marina Gate Project – Dubai, UAE | 2026

In 2026, Rukan Al Ausaf Technical Services L.L.C. successfully carried out renovation and refurbishment works at the Marina Gate Project, Dubai, UAE. The project focused on improving the overall appearance, functionality, and finishing of the existing internal areas.

The scope of work included surface preparation, floor finishing/coating, wall and ceiling painting, installation of customized cabinets and workstations, minor repair and rectification works, and general interior finishing. Existing surfaces were properly prepared and repaired before applying the required finishes to achieve a clean, smooth, and uniform appearance.

All renovation activities were executed systematically with proper protection of the surrounding areas and attention to workmanship and finishing details. Upon completion, the renovated areas were thoroughly inspected, cleaned, and handed over in a neat and ready-to-use condition.

The project was completed with a strong focus on quality workmanship, durability, safety, and client satisfaction, providing the area with a fresh, clean, and professionally renovated appearance.

📞 Project Inquiries: +971 56 508 0259
📧 Email: [email protected]

03/09/2026

**GUNITING WORKS**

**Structural Concrete Strengthening Project – Dubai, UAE | 2026**

In 2026, **Rukan Al Ausaf Technical Services L.L.C. (RTS)** successfully carried out specialized **guniting works** for a structural concrete project in Dubai, UAE. The works were executed using professional spraying equipment, skilled operators, and controlled application techniques to achieve a strong, durable, and uniform concrete finish.

The scope of work included **surface preparation, cleaning of the concrete substrate, preparation of the work area, setup of guniting equipment, and application of approved concrete mix by spraying onto the prepared surface**. The material was applied systematically to achieve the required thickness, proper compaction, bonding, and structural performance.

During application, the gunite material was sprayed in controlled layers by experienced nozzle operators. Proper nozzle distance and spraying angle were maintained to minimize rebound and ensure effective compaction and uniform coverage across the treated areas.

Following the guniting application, the completed surfaces were properly **levelled, trimmed, and finished** according to project requirements. Appropriate curing procedures were carried out to support strength development, reduce shrinkage, and improve the long-term durability of the completed concrete works.

Throughout the ex*****on, our technical team maintained **continuous site supervision, quality control, and safety compliance**. Particular attention was given to material consistency, application thickness, surface finishing, curing, and overall workmanship.

The successful ex*****on of these **guniting works** demonstrates the technical capability of **Rukan Al Ausaf Technical Services L.L.C. (RTS)** in specialized concrete works, structural strengthening, concrete rehabilitation, and construction solutions across the UAE.

📞 **Project Inquiries:** +971 56 508 0259
📧 **Email:** [[email protected]](mailto:[email protected])

03/09/2026

GROUTING & TILE INSTALLATION WORKS
In 2026, Rukan Al Ausaf Technical Services L.L.C. successfully completed grouting and tile installation works for a residential/commercial project in Dubai, UAE. The works were carried out with careful attention to proper alignment, level, joint consistency, finishing quality, and long-term durability.

The scope of work included surface preparation, tile layout and setting-out, cutting and installation of floor and wall tiles, application of approved tile adhesive, joint preparation, grouting, edge finishing, and final cleaning. All activities were performed using suitable materials, professional tools, and skilled technicians to achieve a neat and uniform finish.

Before tile installation, the substrate was thoroughly inspected, cleaned, and prepared to provide a stable and suitable surface. Tile layouts were carefully planned to maintain proper alignment and minimize unnecessary cuts. Tiles were then installed using approved adhesive while maintaining the required levels, spacing, and joint lines.

After completion of the tile installation, all joints were properly cleaned and filled with suitable tile grout. Special attention was given to achieving consistent joint width, smooth grout finishing, clean edges, and a professional overall appearance. Excess grout and adhesive were removed, and the completed tiled surfaces were thoroughly cleaned.

Throughout the project, our technical team maintained proper site supervision and quality control to ensure compliance with project requirements and approved workmanship standards. All works were completed with attention to quality, durability, safety, and aesthetic finishing.

The successful completion of the grouting and tile installation works demonstrates the expertise of Rukan Al Ausaf Technical Services L.L.C. in floor and wall finishing, tile installation, renovation, and specialized technical services, delivering reliable and high-quality solutions across the UAE.

📞 Project Inquiries: +971 56 508 0259
📧 Email: [email protected]

01/09/2026

# PAINTING WORKS

**Painting & Refurbishment Project – Dubai, UAE | 2026**

In 2026, **Rukan Al Ausaf Technical Services L.L.C.** successfully completed painting works for a refurbishment project in Dubai, UAE. The project involved complete surface preparation, repair of minor cracks and surface defects, application of suitable primers, and high-quality interior and exterior paint finishes to improve the appearance, protection, and durability of the building surfaces.

The scope of work included preparation of existing walls and ceilings, removal of loose and damaged paint, crack and surface rectification, putty application, sanding, primer application, and application of approved paint coats. Special attention was given to achieving proper surface preparation, uniform coverage, correct color matching, and a smooth and consistent final finish.

The work was carried out in carefully planned stages. Initially, the existing surfaces were inspected and all loose paint, dust, dirt, and defective materials were removed. Minor cracks, holes, and uneven areas were repaired using suitable filling materials. The surfaces were then properly sanded and cleaned to provide a smooth and suitable base for the painting system.

After surface preparation, the required primer coat was applied to improve adhesion and provide a uniform base. Approved paint was then applied in the required number of coats using suitable rollers, brushes, and spray equipment where applicable. Each coat was allowed sufficient drying time before application of the subsequent coat to achieve a durable and uniform finish.

Upon completion, all painted surfaces were inspected for color consistency, coverage, smoothness, and overall workmanship. Necessary touch-up works were carried out, and the work areas were cleaned and handed over in good condition.

Throughout the project, our technical team maintained strict quality control, continuous site supervision, and compliance with project specifications and applicable safety requirements. All works were completed using approved materials, skilled painters, and suitable tools and equipment to ensure high-quality workmanship.

The successful completion of the painting works demonstrates the expertise of **Rukan Al Ausaf Technical Services L.L.C.** in painting, refurbishment, surface restoration, and building maintenance solutions, delivering professional, durable, and high-quality finishes.

📞 Project Inquiries: +971 56 508 0259
📧 Email: [email protected]

31/08/2026

Surface Cleaning
Cracks Repairing
Primer work
First Coat of Waterproofing work
Final coat of Waterproofing Work.

📞 Project Inquiries: +971 56 508 0259
📧 Email: [email protected]

31/08/2026

SHOTCRETE (GUNITING) WORKS
Structural Strengthening Project – Dubai, UAE | 2026
In 2026, Rukan Al Ausaf Technical Services L.L.C. successfully completed shotcrete (guniting) works for a structural strengthening project in Dubai, UAE. The project involved surface preparation, reinforcement steel mesh fixing, and the application of high-quality wet-mix shotcrete to strengthen and restore reinforced concrete elements while ensuring durability and structural integrity.
The scope of work included hydroblasting and thorough cleaning of the existing concrete surface, installation of reinforcement steel mesh, substrate preparation, and application of C30 wet-mix shotcrete using approved equipment and techniques. Special attention was given to achieving the specified thickness, proper bonding with the existing concrete, and a smooth, uniform finished surface.
The work was carried out in carefully planned stages. Initially, all loose, weak, and damaged concrete was removed. The surface was then thoroughly hydroblasted to eliminate dust, contaminants, and deteriorated material and to create a clean and suitable bonding surface. Reinforcement steel mesh was securely fixed in accordance with the required spacing and anchoring details before the shotcrete was applied in controlled layers.
After application, the finished shotcrete surface was properly levelled, finished, and cured to achieve the specified compressive strength and long-term performance. Proper curing procedures were followed to minimize shrinkage and support the durability of the repaired concrete elements.
Throughout the project, our technical team maintained strict quality control, continuous site supervision, and full compliance with project specifications and applicable safety standards. All works were completed using approved materials, skilled operators, and modern equipment to ensure high-quality workmanship.
The successful completion of the shotcrete (guniting) works demonstrates the expertise of Rukan Al Ausaf Technical Services L.L.C. in structural rehabilitation, concrete strengthening, and specialized construction solutions, delivering safe, durable, and high-quality results.

📞 Project Inquiries: +971 56 508 0259
📧 Email: [email protected]

Exterior Painting Works Successfully Completed | Bay Central, Dubai 🇦🇪Rukan Al Ausaf Technical Services L.L.C. (RTS) suc...
17/08/2026

Exterior Painting Works Successfully Completed | Bay Central, Dubai 🇦🇪

Rukan Al Ausaf Technical Services L.L.C. (RTS) successfully completed exterior painting and surface restoration works at Bay Central, Dubai.

The project included:

🔹 Inspection and preparation of external surfaces
🔹 Removal of loose, damaged, and flaking paint
🔹 Repair of minor cracks and surface imperfections
🔹 Sanding and levelling of repaired areas
🔹 Application of approved primer
🔹 Application of high-quality exterior paint coats
🔹 Protection of nearby doors, glazing, cameras, paving, and finished surfaces
🔹 Final touch-ups and cleaning

Our technical team carried out the works with close attention to surface preparation, colour consistency, adhesion, finishing quality, durability, and site safety.

Using approved materials, skilled painters, and professional application methods, RTS delivered a clean and durable finish in line with project requirements.

This project highlights RTS’s experience in exterior painting, protective coating systems, surface rehabilitation, and building maintenance works across the UAE.

📞 Project Inquiries: +971 56 508 0259
📧 Email: [email protected]

Leakage Rectification Successfully Completed | Dubai, UAE 🇦🇪Rukan Al Ausaf Technical Services L.L.C. (RTS) has successfu...
15/08/2026

Leakage Rectification Successfully Completed | Dubai, UAE 🇦🇪

Rukan Al Ausaf Technical Services L.L.C. (RTS) has successfully completed Leakage Treatment Injection System Works for a parking structure in Dubai.

The works were carried out to stop water seepage through cracks, construction joints, and internal voids using an approved PU Injection System.

🔹 Identification of leakage points
🔹 Drilling & installation of injection packers
🔹 Controlled polyurethane (PU) injection
🔹 Sealing of cracks, joints & internal voids
🔹 Removal of packers & sealing of injection holes
🔹 Surface repair & final finishing

Our experienced technical team completed the work with a strong focus on quality, safety, and long-term waterproofing performance, using approved materials and professional injection equipment.

Another successful project demonstrating RTS’s expertise in waterproofing, leakage treatment, PU injection, crack repair, and concrete rehabilitation works across the UAE.

📞 For Project Inquiries: +971 56 508 0259
📧 Email: [email protected]

Address

Arjumand Building, Royal Class 4th Floor Office 472, DIP – 1
Dubai
296257

Opening Hours

Monday 07:00 - 18:00
Tuesday 07:00 - 18:00
Wednesday 07:00 - 18:00
Thursday 07:00 - 18:00
Friday 07:00 - 18:00
Saturday 07:00 - 18:00

Website

Alerts

Be the first to know and let us send you an email when Rukan Al Ausaf Technical Services LLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category